SUS316Ti
Characteristics
SUS316Ti is a material stabilised by adding titanium (Ti) to SUS316, and it shows great corrosion resistance to low concentrations of hydrochloric acids and organic acids. It also allows for long-term application at high temperatures without damaging its corrosion resistance.
Stock Form and Sizes
◆1000mm ◎2000mm ▲3000mm ■3500mm ●4000mm ★2500mm～3990mm
Peeled round barsSpecification：ASTM A182/A276/A479、ASME SA182/SA276/SA479、NACE MR0175/MR0103、EN 1.4571
| Size 8〜26 | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8 | 10 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 26 |
| ★ | ★ | ★ | ★ | |||||||||||
| Size 27〜48 | ||||||||||||||
| 27 | 28 | 30 | 32 | 33 | 34 | 35 | 36 | 38 | 40 | 42 | 44 | 45 | 46 | 48 |
| ★ | ★ | ★ | ★ | ★ | ||||||||||
| Size 50〜140 | ||||||||||||||
| 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 90 | 95 | 100 | 110 | 120 | 130 | 140 |
| ★ | ★ | ★ | ★ | ★ | ★ | ★ | ★ | |||||||
| Size 150〜250 | ||||||||||||||
| 150 | 160 | 170 | 180 | 190 | 200 | 230 | 250 | |||||||
| ★ | ★ | ★ | ||||||||||||
Chemical composition
| Ni | Cr | Fe | C | Mn | Si | Co | P | S | Mo | Cu | N | Nb | Ta | Nb+Ta | W | V | other | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| min | 10.0 | 16.0 | 2.00 | Ti5x(CxN)_0.70 | ||||||||||||||
| max | 14.0 | 18.0 | 0.08 | 2.00 | 1.00 | 0.045 | 0.030 | 3.00 | 0.10 |
※Above is standard values of ASTM A276. For further information, please contact us.
Mechanical properties
| Tensile Strength N/mm² | 0.2% Yield Strength N/mm² | Elongation ％ | Reduction of Area ％ | Hardness | |
|---|---|---|---|---|---|
| min | 520 | 205 | 40 | 50 | |
| max | HBW187 |
※Above is standard values of ASTM A276. For further information, please contact us.
International Specification Comparison chart
| Material | Round bars | Plates/Sheets | Pipes/Tubes | ||
|---|---|---|---|---|---|
| Seamless | Welded | ||||
| JIS | SUS316Ti | G4303/G4318 | G4304/G4305 | G3459 | G3459 |
| ASTM | S31635 | A182/A276/A479 | A240 | A312 | A312 |
| ASME | S31635 | SA182/SA276/SA479 | SA240 | SA312 | SA312 |
| DIN/EN | 1.4571 | ||||
- Disclaimer
- All the information on this website is published in good faith and for general information purpose only and not for technical design purposes. We do not make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information on our website is strictly at your own risk. and we will not be liable for any losses and damages in connection with the use of our website.