A286(SUH660Equivalent)
Characteristics Corrosion Resistance Applications Chemical Composition Mechanical properties International Standard Comparision Chart Stock Form And Sizes Cold Finished Round Bars |
Peeled Round Bars |
Characteristics
In JIS, A286 is a precipitation-hardenable austenitic heat resisting steel equivalent to SUH660. Its excellent strength and corrosion resistance in high-temperature environments of up to 700°C make it perfect for low stress applications. It is used as materials for rotors, bolts, blades, shafts, and other parts of a gas turbine and steam turbine.
It is non-magnetic and is also fit for applications requiring ductility in cryogenic environments as low as -196°C.
Stock Form and Sizes
◆1000mm ◎2000mm ▲3000mm ■3500mm ●4000mm ★2500mm~3990mm
Peeled round barsSpecification:ASTM A453 B&D /A638 Type2、ASME SA453 B /SA638 Type2、AMS5732、GE S-400、GE S-1000、NACE MR0175/MR0103
Size 10〜28 | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
8 | 10 | 13 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 26 | 27 | 28 |
★ | ★ | ★ | ★ | ★ | ★ | ★ | ★ | |||||||
Size 30〜55 | ||||||||||||||
30 | 32 | 33 | 35 | 36 | 38 | 40 | 42 | 44 | 45 | 46 | 48 | 50 | 55 | 60 |
★ | ★ | ★ | ★ | ★ | ★ | |||||||||
Size 65〜170 | ||||||||||||||
65 | 70 | 75 | 80 | 85 | 90 | 95 | 100 | 110 | 120 | 130 | 140 | 150 | 160 | 170 |
★ | ★ | ★ 88.9 NEW |
★ 101.6 NEW |
★ 127 NEW |
||||||||||
Size 180〜200 | ||||||||||||||
180 | 190 | 200 | ||||||||||||
Chemical composition
Ni | Cr | Fe | C | Mn | Si | Co | P | S | Mo | Cu | N | Nb | Ta | Nb+Ta | W | V | other | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
min | 24.00 | 13.50 | 1.00 | 0.10 | Ti: 1.90-2.35 Al: Max 0.35 B: 0.003-0.010 |
|||||||||||||
max | 27.00 | 16.00 | 0.08 | 2.00 | 1.00 | 1.00 | 0.025 | 1.50 | 0.50 | 0.50 |
※Above is standard values of AMS5732. For further information, please contact us.
Mechanical properties
A286(AMS5732)
Tensile Strength Mpa | 0.2% Yield Strength Mpa | Elongation % | Reduction of Area % | Hardness | |
---|---|---|---|---|---|
min | 896 | 586 | 15 | 20 | HB248 |
max | HB341 |
A286(AMS5737)
Tensile Strength Mpa | 0.2% Yield Strength Mpa | Elongation % | Reduction of Area % | Hardness | |
---|---|---|---|---|---|
min | 965 | 655 | 12 | 15 | HB277 |
max | HB363 |
※Above is standard values of AMS5732. For further information, please contact us.
International Specification Comparison chart
Material | Round bars | Plates/Sheets | Pipes/Tubes | ||
---|---|---|---|---|---|
Seamless | Welded | ||||
JIS | SUH660 | G4311 | G4312 | ||
ASTM | S66286 | A453/A638 | |||
ASME | S66286 | SA453/SA638 | |||
DIN/EN | 1.4980 |
Our Export Market
We export our stainless steel and alloy steel products across the globe, trusted for our quality, reliability, and commitment to every customer.
