Stainless Steel Buttweld Fitting accomplish a lot of admiration by our clients owing to its high strength, dimensional correctness, high tension power, corrosion resistant and consistency. These products are used in various commercial, industrial and automobile industries. We manufacture these fittings using high grade of raw material by implementing most ultra modern technology. These products are clients can avail from us at various sizes, shapes and design as per the requirements
| Grades : | Stainless Steel 202, 303, 309, 310, 304, 304L, 316, 316L, 316TI, 317, 317L, 321, 410, 416, 420, 430, 440C, 904L |
| Range : | 15 NB To 300 NB |
| Type : | Bend (Long & Short), Elbow (180 Deg., 90 Deg. & 45 Deg.), Tee (Equal & Unequal), Reducer (Concentric & Eccentric), CAP, Stub end (Long &Short), Nipple (Barrel) |
| Application : | Petrochemicals Plants, Chemical Plants,Industrial Machinery,Power Industry, Government Companies |
| Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
| BS | En | No | Name | ||||
| 310 | S31000/S31008 | – | – | 1.4841/1.4845 | – | – | SUS 310 – 310S |
| 304 | S30400 | 304S31 | 58E | 1.4301 | X5CrNi18-10 | 2332 | SUS 304 |
| 304L | S30403 | 304S11 | 58E | 1.4301 | X5CrNi18-10 | 2332 | SUS 304L |
| 316 | S31600 | 304S11 | 58E | 1.4401 | X5CrNiMo17-12-2 | 2347 | SUS 316 |
| 316L | S31603 | 304S11 | 58E | 1.4436 | X3CrNiMo17-13-3 | 2348 | SUS 316L |
| 316TI | S31635 | 320S31 | 08Ch17N13M2T | 1.4571 | X6CrNiMoTi17-12-2 | Z6CNDT17‐123 | SUS 316Ti |
| 317 | S31700 | – | – | 1.4449 | – | – | SUS 317 |
| 317L | S31703 | – | – | 1.4438 | X2CrNiMo18-15-4 | – | SUS 317L |
| 321 | S32100 | – | – | 1.4541 | X6CrNiTi18-10 | – | SUS 321 |
| 410 | S41000 | 410S21 | 56A | 1.4006 | X12Cr13 | 2302 | SUS 410 |
| 904L | N08904 | 904S13 | – | 1.4539 | X1NiCrMoCu25-20-5 | – | SUS 890L |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
| 304 | min. | – | – | – | – | – | 18.0 | – | 8.0 | – |
| max. | 0.08 | 2.0 | 0.75 | 0.045 | 0.030 | 20.0 | 10.5 | 0.10 | ||
| 304L | min. | – | – | – | – | – | 18.0 | – | 8.0 | – |
| max. | 0.03 | 2.0 | 1.00 | 0.045 | 0.03 | 20.0 | 12.0 | – | ||
| 310 |
min. | – | – | – | – | – | 24.0 | – | 19.0 | – |
| max. | 0.25 | 2.0 | 1.50 | 0.045 | 0.030 | 26.0 | 22.0 | – | ||
| 316 | min. | – | – | – | – | – | 16.0 | 2.0 | 10.0 | – |
| max. | 0.08 | 2.0 | 0.75 | 0.045 | 0.03 | 18.0 | 3.0 | 14.0 | 0.10 | |
| 316L | min. | – | – | – | – | – | 16.0 | 2.0 | 10.0 | – |
| max. | 0.08 | 2.0 | 0.75 | 0.045 | 0.03 | 18.0 | 3.0 | 14.0 | 0.10 | |
| 316TI | min. | – | – | – | – | – | 16.0 | 2.0-3.0 | 10.0 | – |
| max. | 0.08 | 2.0 | 0.75 | 0.045 | 0.030 | 18.0 | 14.0 | 0.1 | ||
| 317 | min. | – | – | – | – | – | 18.0 | 3.0-4.0 | 11.0 | – |
| max. | 0.08 | 2.0 | 1.0 | 0.040 | 0.030 | 20.0 | 14.0 | – | ||
| 317L | min. | – | – | – | – | – | 18.0 | 3.0-4.0 | 11.0 | – |
| max. | 0.08 | 2.0 | 1.0 | 0.040 | 0.030 | 20.0 | 15.0 | – | ||
| 321 | – | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 – 19.00 | 0.10 max | 9.00 – 12.00 | 5(C+N) – 0.70 max |
| 410 | min. | – | – | – | – | – | 11.5 | – | – | – |
| max. | 0.15 | 1.0 | 1.00 | 0.040 | 0.030 | 13.5 | – | 0.75 | – | |
| 904L | min. | – | – | – | – | – | 19.0 | 4.00 | 23.00 | 0.10 |
| max. | 0.20 | 2.00 | 1.00 | 0.045 | 0.035 | 23.0 | 5.00 | 28.00 | 0.25 | |
| Central/South America |
North America |
|
Asia |
Mid East/Africa |
|
Western Europe |
Australasia |
|
Eastern Europe |
UAE |
| Sri Lanka | Bahrain |
| Russia | Egypt |
| Portugal | Turkey |
| Spain | Singapore |
| Brazil | Thailand |
| Chile | Malaysia |
| Venezuela | Indonesia |
| Costa Rica | Poland |
| USA, U.A.E | Italy |
| Oman | Canada |
| Saudi Arabia | Angola |
| Qatar |
