SUS403(A)/SUS403(H)
| Characteristics Corrosion Resistance Applications Chemical Composition Mechanical properties International Standard Comparision Chart Stock Form And Sizes Cold Finished Round Bars |
Peeled Round Bars |
Characteristics
SUS403 is a general-purpose martensitic stainless steel with excellent corrosion resistance. It can be hardened by quenching and tempering and is suitable for applications requiring combustion resistance and high strength.
Because its carbon content is lower than SUS420J1, SUS403 possesses high corrosion resistance and achieves excellent toughness after heat treatment, but its corrosion resistance is lower than austenitic stainless steels.
Stock Form and Sizes
◆1000mm ◎2000mm ▲3000mm ■3500mm ●4000mm ★2500mm～3990mm
SUS403(A) Cold finished round barsSpecification：JIS G4318
| Size 2〜8 | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 | 2.5 | 3 | 3.5 | 4 | 4.4 | 5 | 5.3 | 5.5 | 6 | 6.35 | 7 | 7.1 | 8 | 8.4 |
| ◎ | ◎ | ◎ | ◎ | ◎ | ◎ | ● | ● | |||||||
| Size 8〜15 | ||||||||||||||
| 8.95 | 9 | 9.52 | 10 | 10.8 | 11 | 11.3 | 12 | 12.7 | 13 | 14 | 14.3 | 14.6 | 15 | 15.87 |
| ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |||
| Size 16〜24 | ||||||||||||||
| 16 | 16.3 | 17 | 17.3 | 18 | 18.3 | 19 | 20 | 20.3 | 21 | 22 | 22.2 | 23 | 23.3 | 24 |
| ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |||
| Size 25〜42 | ||||||||||||||
| 25 | 26 | 27 | 27.62 | 28 | 30 | 30.6 | 32 | 33 | 33.3 | 34 | 35 | 36 | 38 | 40 |
| Size 45～50 | ||||||||||||||
| 42 | 45 | 48 | 50 | |||||||||||
SUS403(H) Peeled round barsSpecification：JIS G4303
| Size 5〜24 | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5 | 6 | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 |
| ● | ● | ● | ● | ● | ||||||||||
| Size 25〜46 | ||||||||||||||
| 25 | 26 | 27 | 28 | 30 | 32 | 33 | 35 | 36 | 38 | 40 | 42 | 44 | 45 | 46 |
| ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |||||
| Size 48〜130 | ||||||||||||||
| 48 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 90 | 95 | 100 | 110 | 120 | 130 |
| ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ★ | ★ | ★ | |
| Size 140〜350 | ||||||||||||||
| 140 | 150 | 160 | 170 | 180 | 190 | 200 | 210 | 230 | 250 | 280 | 300 | 330 | 350 | |
| ★ | ★ | |||||||||||||
Chemical composition
| Ni | Cr | Fe | C | Mn | Si | Co | P | S | Mo | Cu | N | Nb | Ta | Nb+Ta | W | V | other | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| min | 11.50 | |||||||||||||||||
| max | (0.60） | 13.00 | 0.15 | 1.00 | 0.50 | 0.040 | 0.030 |
( )% max may be added.
※Above is standard values of JIS G4303. For further information, please contact us.
Mechanical properties
Soft Annealed
| Tensile Strength N/mm² | 0.2% Yield Strength N/mm² | Elongation ％ | Reduction of Area ％ | Hardness | |
|---|---|---|---|---|---|
| min | |||||
| max | HB200 |
Quench and Tempered
| Tensile Strength N/mm² | 0.2% Yield Strength N/mm² | Elongation ％ | Reduction of Area ％ | Hardness | |
|---|---|---|---|---|---|
| min | 590 | 390 | 25 | 55 | HB170 |
| max |
※Above is standard values of JIS G4303. For further information, please contact us.
International Specification Comparison chart
| Material | Round bars | Plates/Sheets | Pipes/Tubes | ||
|---|---|---|---|---|---|
| Seamless | Welded | ||||
| JIS | SUS403 | G4303/G4318 | – | ||
| ASTM | S40300 | A182/A276/A479 | A240 | ||
| ASME | S40300 | SA182/SA276/SA479 | SA240 | ||
| DIN/EN | |||||
- Disclaimer
- All the information on this website is published in good faith and for general information purpose only and not for technical design purposes. We do not make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information on our website is strictly at your own risk. and we will not be liable for any losses and damages in connection with the use of our website.