logo
Enquiry Now

SUS304

  • Home
  • Product
  • SUS304

SUS304

Characteristics
Corrosion Resistance
Applications
Chemical Composition
Mechanical properties
International Standard Comparision Chart Stock Form And Sizes
Cold Finished Round Bars
 Peeled Round Bars
Knurled Round Bars
Hex Bars
Square Bar

Characteristics

SUS304 is a typical type of austenitic stainless steel 304 suppliers in mumbai, has well-balanced properties in terms of corrosion resistance, toughness, ductility, machinability and weldability, and is highly versatile, therefore being adopted in a wide variety of applications.

Density7.93

Stock Form and Sizes

◆1000mm ◎2000mm ▲3000mm ■3500mm ●4000mm ★2500mm～3990mm

Cold finished round barsSpecification：JIS G4318、ASTM A182/A276/A479、ASME SA182/SA276/SA479、NACE MR0175/MR0103、EN 1.4301
Size 2〜8
2 2.5 3 3.5 4 4.4 5 5.3 5.5 6 6.35 7 7.1 8 8.4
◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎● ◎ ◎● ◎ ◎● ◎● ◎● ●
Size 8〜15
8.95 9 9.52 10 10.8 11 11.3 12 12.7 13 14 14.3 14.6 15 15.87
● ◎● ● ◎● ● ● ● ◎● ● ◎● ● ● ● ● ●
Size 16〜24
16 16.3 17 17.3 18 18.3 19 20 20.3 21 22 22.2 23 23.3 24
● ● ● ● ● ● ● ● ● ● ●   ● ● ●
Size 25〜42
25 26 27 27.62 28 30 30.6 32 33 33.3 34 35 36 38 40
● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Size 45～50
42 45 48 50                      
● ●   ●                      
Peeled round barsSpecification：JIS G4303、ASTM A182/A276/A479、ASME SA182/SA276/SA479、NACE MR0175/MR0103、EN 1.4301
Size 8〜26
8 10 12 13 14 15 16 17 18 19 20 22 24 25 26
            ●   ● ● ● ● ● ● ●
Size 27〜48
27 28 30 32 33 34 35 36 38 40 42 44 45 46 48
● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Size 50〜140
50 55 60 65 70 75 80 85 90 95 100 110 120 130 140
● ● ● ● ● ▲ ▲ ▲ ▲ ▲ ▲ ★ ★ ★ ★
Size 150〜250
150 160 170 180 190 200 230 250              
★ ★ ★ ★ ★ ★ ★ ★              
Knurled round bars
Check/Stripe
6 8 10 12 16 18 19 20 22 24 30
◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎

※Pitch　・Check 1.11　・Stripe 1.05
※Module 0.33
　Please enquire about grades and sizes not in stock.
※all 2000L

Hex barsSpecification：JIS G4318、ASTM A182/A276/A479、ASME SA182/SA276/SA479、NACE MR0175/MR0103、EN 1.4301
Size 5〜24
5.5 6 7 8 10 11 12 13 14 17 19 21 22 23 24
      ▲ ▲   ▲ ▲ ▲ ▲ ▲ ▲ ★ ★ ★
Size 26〜70
26 27 29 30 32 35 36 38 41 46 50 55 60 65 70
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
Size 75〜80
75 80                          
★ ★                          

※H70mm and above are pickled finish.

Square BarSpecification：JIS G4318
Size 2〜15
2 2.5 3 4 5 6 7 8 9 10 11 12 13 14 15
        ● ● ● ● ● ●   ● ● ● ●
Size 16〜40
16 17 18 19 20 22 24 25 26 28 30 32 36 38 40
● ●   ● ● ●   ●     ● ●   ● ●
Size 45〜50
45 50                          
● ●                          

Chemical composition

  Ni Cr Fe C Mn Si Co P S Mo Cu N Nb Ta Nb+Ta W V other
min 8.00 18.00                                
max 10.50 20.00   0.08 2.00 1.00   0.045 0.030                  

※Above is standard values of JIS G4303. For further information, please contact us.

Mechanical properties

  Tensile Strength　N/mm² 0.2%Yield Strength　N/mm² Elongation　％ Reduction of Area　％ Hardness
min 520 205 40 60  
max         HBW187

※Above is standard values of JIS G4303. For further information, please contact us.

International Specification Comparison chart

  Material Round bars Plates/Sheets Pipes/Tubes
Seamless Welded
JIS SUS304 G4303/G4318 G4304/G4305 G3459 G3459
ASTM S30400 A182/A276/A479 A240 A312 A312
ASME S30400 SA182/SA276/SA479 SA240 SA312 SA312
DIN/EN 1.4301        
Disclaimer
All the information on this website is published in good faith and for general information purpose only and not for technical design purposes. We do not make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information on our website is strictly at your own risk. and we will not be liable for any losses and damages in connection with the use of our website.