ALLOYC276 (Hastelloy C276)

We are Distributors and Suppliers of Alloy C276 products.

ALLOYC276 (Hastelloy C276)

Corrosion Resistance
Chemical Composition
Mechanical properties
International Standard Comparision Chart Stock Form And Sizes
Round Bars
Hex Bars
Nuts And Washers
Spring Washer
Hex Bolt
Stud Bolt
Sourceable Materials


Alloy C276 is a Ni-Cr-Mo alloy containing W and extremely low carbon and Si contents. Excellent resistance to a wide range of corrosive media, under oxidizing and reducing conditionsExcellent resistance to pitting, crevice corrosion, and stress corrosion cracking.



Stock Form and Sizes

※ ◆1000㎜ ◎2000㎜ ▲3000㎜ ■3500㎜ ●4000㎜ ★2500㎜~3990㎜

Round Bars

Specification: ASTM B574/B564※ ASME SB574/SB564※ NACE MR0175(ISO 15156) ※B564/SB564 Apply to Forged Bar Only

size 1〜18
size 19〜60
size 65〜145
size 150〜350

Hex bars

Specification: ASTM B574


Spring Washer


※Please enquire about grades and sizes not in stock.

Hex Bolt

Specification:JIS B1180, Semi-Finished Type



※Please enquire about grades and sizes not in stock.

Sourceable Ex-Stock Material for Other Forms from Distributors World-Wide

EquivalentRound BarsPlatePipe/TubeWelding Rod amp; Wire
MinMax MinMax
Hastelloy C2763.18~279.40.35〜100

*○: Various sizes available in stock. △: Only limited sizes available in stock. ☆: Please contact us for more details. * We can supply materials and products that comply with various standards including ASTM, ASME, AMS, and NACE standards. Please contact us for more details.

Corrosion resistance

Alloy C276 can be used in many chemical processes with oxidizing and with reducing media. The high molybdenum and chromium contents render the alloy resistant to chloride ion attack. The tungsten content further increases this resistance. Alloy C276 is one of the few materials that is resistant to moist chlorine gas, hypochlorite and chlorine dioxide solutions. The alloy exhibits excellent resistance to concentrated solutions of oxidizing salts (such as iron (III) chloride and copper chloride).


Alloy C276 finds wide application in the chemical and petrochemical industry, for components in organic processes containing chlorides, and for catalytic systems. This material is especially suitable for use in situations where hot, contaminated mineral acids, solutions and organic acids (such as formic and acetic acid) as well as sea water are encountered.

Typical applications are:

  • Pulp and paper industry, e.g. for digestion and bleaching vessels
  • Scrubbers and special reheaters as well as wet-operating fans for combustion and flue gas desulphurisation systems
  • Equipment and components for sour-gas service
  • Reactors for acetic acid production
  • Sulphuric acid coolers
  • Methylene diphenyl isocyanate (MDI)
  • Manufacture and processing of technically impure phosphoric acid
  • Combustion-resistant alloy for high pressure oxygen applications

Chemical composition

minbal.14.54.0   15.03.0    

※The values in the table are for reference only and do not guarantee minimum or maximum values. For further information, please contact us.

Mechanical properties(Round Bar)

 ConditionYield Strength(Mpa)Tensile Strength(Mpa)Elongation(%)Hardness(HB)
ASTM Min ValueSolution Annealed28369040 
Typical Values at RTSolution Annealed40279460195

Above standard values and typical values of Round Bar. Please contact us with any questions about reference or value of plate and pipe.
※The values in the table are for reference only and do not guarantee minimum or maximum values. For further information, please contact us.

International Standard Comparison Chart

 MaterialRound BarsPlates/SheetsPipe/Tube

All the information on this website is published in good faith and for general information purpose only and not for technical design purposes. We do not make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information on our website is strictly at your own risk. and we will not be liable for any losses and damages in connection with the use of our website.