SUS316

SUS316

Characteristics
Corrosion Resistance
Applications
Chemical Composition
Mechanical properties
International Standard Comparision Chart Stock Form And Sizes
Cold Finished Round Bars
Peeled Round Bars
Knurled Round Bars
Hex Bars
Square Bar

Characteristics

SUS316 is an austenitic stainless steel containing molybdenum and is most widely used next to SUS304. Its corrosion resistance is generally superior to SUS304, especially in chloride-containing environments, and is highly resistant to pitting and crevice corrosion.

Density7.94

Stock Form and Sizes

◆1000mm ◎2000mm ▲3000mm ■3500mm ●4000mm ★2500mm~3990mm

Cold finished round barsSpecification:JIS G4318、ASTM A182/A276/A479、ASME SA182/SA276/SA479、NACE MR0175/MR0103、EN 1.4401
Size 2〜8
2 2.5 3 3.5 4 4.4 5 5.3 5.5 6 6.35 7 7.1 8 8.4
  ◎●   ◎●
Size 8〜15
8.95 9 9.52 10 10.8 11 11.3 12 12.7 13 14 14.3 14.6 15 15.87
◎●   ◎●   ◎● ◎●  
Size 16〜24
16 16.3 17 17.3 18 18.3 19 20 20.3 21 22 22.2 23 23.3 24
       
Size 25〜42
25 26 27 27.62 28 30 30.6 32 33 33.3 34 35 36 38 40
                       
Size 45~50
42 45 48 50                      
                             
スクロールできます
Peeled round barsSpecification:JIS G4303、ASTM A182/A276/A479、ASME SA182/SA276/SA479、NACE MR0175/MR0103、EN 1.4401
Size 8〜26
8 10 12 13 14 15 16 17 18 19 20 22 24 25 26
                 
Size 27〜48
27 28 30 32 33 34 35 36 38 40 42 44 45 46 48
   
Size 50〜140
50 55 60 65 70 75 80 85 90 95 100 110 120 130 140
Size 150〜250
150 160 170 180 190 200 230 250              
             
スクロールできます
Hex barsSpecification:JIS G4318、ASTM A182/A276/A479、ASME SA182/SA276/SA479、NACE MR0175/MR0103、EN 1.4401
Size 5〜24
5.5 6 7 8 10 11 12 13 14 17 19 21 22 23 24
Size 26〜70
26 27 29 30 32 35 36 38 41 46 50 55 60 65 70
Size 50〜140
75 80                          
                         
スクロールできます

※H70mm and above are pickled finish.

Chemical composition

  Ni Cr Fe C Mn Si Co P S Mo Cu N Nb Ta Nb+Ta W V other
min 10.00 16.00               2.00                
max 14.00 18.00   0.08 2.00 1.00   0.045 0.030 3.00                

※Above is standard values of JIS G4303. For further information, please contact us.

Mechanical properties

  Tensile Strength N/mm² 0.2% Yield Strength N/mm² Elongation % Reduction of Area % Hardness
min 520 205 40 60  
max         HBW187

※Above is standard values of JIS G4303. For further information, please contact us.

International Specification Comparison chart

  Material Round bars Plates/Sheets Pipes/Tubes
Seamless Welded
JIS SUS316 G4303/G4318 G4304/G4305 G3459 G3459
ASTM S31600 A182/A276/A479 A240 A312 A312
ASME S31600 SA182/SA276/SA479 SA240 SA312 SA312
DIN/EN 1.4401        
Disclaimer
All the information on this website is published in good faith and for general information purpose only and not for technical design purposes. We do not make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information on our website is strictly at your own risk. and we will not be liable for any losses and damages in connection with the use of our website.

Stock list

CONTACT

OSAKA STAINLESS

Inquiry/Request for information

TEL 81-6-6586-5626
FAX 81-6-6586-5858

E-MAIL:info@osc21.co.jp

Business hours: 8:00 - 17:00(closed on Saturdays, Sundays and National Holidays)